-
18653418257 -
-
-
機床概述Overview of Machine
鉆孔范圍：Φ1.0～Φ10mm
Drilling range: Φ 1.0 to Φ 10mm
最大鉆孔深度：500mm
Maximum drilling depth: 500mm
最大鉆孔長徑比200:1
Maximum borehole aspect ratio 200:1
最大工件長徑比60:1
Maximum workpiece aspect ratio 60:1
工件外徑范圍：Φ8～Φ40mm
Workpiece outer diameter range: Φ 8~ Φ 40mm
槍鉆鉆孔方式
，單/雙/四主軸結構，可同時加工一個/兩個/四個工件，適用于細長軸的加工床頭箱：驅動工件旋轉，轉速恒定120r/min
Gun drill drilling method, single/double/four spindle structure, capable of processing one/two/four workpieces simultaneously, suitable for processing slender shafts，
床頭箱：驅動工件旋轉，轉速恒定120r/min
Headbox: Drive the workpiece to rotate at a constant speed of 120r/min
槍鉆鉆床上用的導軌采用直線導軌
The guide rail used on the gun drilling machine adopts a linear guide rail
槍鉆數控系統：SIEMENS-808D， KND，
Gun drill CNC system: SIEMENS-808D, KND,
數控槍鉆鉆桿箱：采用伺服主電機驅動
CNC gun drill pipe box: driven by servo main motor
機床主參數machine main parameter
技術規格technical data
參數parameter
工作范圍working range
鉆孔直徑范圍 drilling hole diameter range
Φ1.0～Φ10mm
鉆孔最大深度drilling hole max depth
500mm
工件最大長度workpiece max length
500mm
主軸數量spindle numbers
2pc
主軸間距spindles spaces
140mm
機床性能machine charactors
Z軸
z axis進給速度范圍Feed speed range
5～500mm/min
快速移動速度Fast moving speed
3000mm/min
進給電機扭矩Feed motor torque
8Nm
鉆桿箱
Drilling box
轉速范圍speed range
500～6000r/min
電機功率power
3.7KW
冷卻系統cooling system
最大壓力Maximum pressure
15MPa
最大流量maximum flow
50L/min
過濾精度Filtration
5μm
油箱容積(約) Fuel tank capacity (approximately)
1000L